Відео

Funny how you had the same issues as me and the solution was also the exact same😂 Speaker replacement and putting the ribbon cable back in place

Nice vid, Thanks.

my spring broke, what should i do?

long shot but would you do a commission for the game gamesphere mod?

My mouse is working fine again, but I have a issue that randomly appears. some times my left mouse button registers it being pressed down at random and keeps giving off a signal of being pressed. It only disappears if I click it like 3-5 times. Any idea what could be causing this? (I'm using the exact same switch as the original)

Thanks so much for this. It was a great help and my G502 is even better now thanks to those "heavier" switches :)

Seems like it would be easier to just buy a decent joystick tbh. I barely used mine like <20 hours worth and it's already broken like this.

drake and josh

Not sure if you'll see this, but I keep running into an issue where it says :\Program Files (x86)\Arduino\hardware\teensy\avr\libraries\MTP_Teensy\src/MTP_Teensy.h:32:2: error: #error "You need to select USB Type: 'MTP Disk (Experimental)' or 'Serial + MTP Disk (Experimental)'" 32 | #error "You need to select USB Type: 'MTP Disk (Experimental)' or 'Serial + MTP Disk (Experimental)'" | ^~~~~ Not sure how to fix this. Do I have the wrong version of MTP_Teensy or something?

I've followed the tutorial and have only one problem: a weird noise when recording. Look like it's when the SD card writing (during the record) that the noise occur. The noise is synchronised with a LED on the teensy (the one behind the SD Card) Here what I've checked: - wiring look ok - no error in code - used different power supply (pc & normal plug) - used a ground isolator - tested 3 differents mic and the noise is still here - used different card sd (32gb can't write on it but can read - 16gb doesn't work - a 128MB work fine) - wire directly to the teensy without passing by the phone card I'm asking for any help :)

Great Video! You helped me out a lot. Now everything is klicking nicely.

SPHERICAL!!!!! 🔴🔴🔴

GameSphere?? It’s only the most sophisticated gaming experience ever created by humans...and it's spherical...𝗦𝗣𝗛𝗘𝗥𝗜𝗖𝗔𝗟!!!!! 🥺

Hey I don’t know if you check these comments on here but I have the exact same phone and was wondering if you would be able to share your code for this project? I am so close to having it done but have the same issue with the quiet recordings.

Thats one thing my cheap rog Wireles Mouse does better, there the switches are replaceable from the get go. But overall i preffer the hero.

This isn’t the Gamesphere! The Gamesphere is green! And made by Okama! And you can play Thirst for BIood on it!

interesting,the shell looks fake but the game is legit inside?

here's a little tip for those who are interested in changing or replacing a part. the first time you do it. it's gonna be hard, and there will be times you mess up. but, the second time you give it a try you'll succeed. but I do recommend after you take apart your first console/system etc give it some time to let it sink in also. I HIGHLY recommend you buy a tool kit smt with alot of screws like Philips and tri wing

Small updates: - I did manage to fix the weird ground looping sound at 29:10. Turns out that the terminal block in this phone shares a lot of internal wiring so things kept getting crossed (probably. I didn't dismantle it to see so it's just a theory -a phone? theory-). Solution to that was just wiring everything together manually and forgoing the terminal block at all. This might be the biggest factor for many people with this style of phone. - I replaced the microphone. I used these: www.amazon.com/dp/B01N0VMN9P. Though and electrect style microphone will work. Just be wary of your gain settings. This improved recordings dramatically. - I added a status LED linked to the power button I put on the back. It's simple and it keeps me from plugging in the USB while it's on and potentially shorting things out. Hope that helps!

Thank you so much dude, this video helped me a lot.

How much did u pay? I only see versions which costs over 150 dollers… is it worth it?

What's the chance of winning a mini ITX PC in there

very good,I like nintendo Wii U and cat

I thought he would just put a game cube inside it and call it a day.

What’s that strip you used to press against the pins??

what shape was the game sphere again

I want to show my appreciation to this video. Today I just successfully replace my click switch by following details of your video. This is an amazing video that thoroughly narating the process of replacing click switch. Thank you so much for your tutorial, and Kudos to you, sir.

This was the best video on this topic on the whole of UA-cam. Thank you 😢

AND ITS SPHERICAL. SPHERICAALL

Did you download the code and it worked np, i'm having trouble with the code. Not sure if something is supposed to be changed in the code.

I followed this procedure and other than the yaw being backwards it works (I reverse back it in the games). This took a while to complete but it works great. I used Kapton tape to insulate the 2 outside legs of the IC and only 5, of the 6x3mm magnets I had which was about 1/2" in length total. If you have fiddly skills and patience, this mod is so much better than stock and corrects the drift and jiggle. I hot glued the top and around the edge and lots of glue where it wouldn't interfere and the magnets placed below the IC.

Wait what r u replacing u took the entire thing apart💀

hi kitty :D

damn, i got the cheapest stick TM got, and the Y potentiometer just fucking died, tried to repair it, but it's superglued to the plastic tab that holds the halfpipe for the joystick

I swear its made to break. Optical and hall effect joysticks have existed for 25+ years. Im gonna see if i can dig up and convert my old Microsoft sidewinder force feedback stick to USB rather than go through repairing this mess. That one uses fully optical system for everything including throttle.

One of the best tutorials I have ever seen about anything. No nonsense. Straight to the point. Step by step. Was able to knock out my replacement in less than an hour just following your instructions. Thanks dude

Why doesn't this have more views WTF?!?! THIS IS AWESOME lol

lmao what a useless project are you that bored or too stupid to use emulators

hey! There is no need to remove the battery :) Thank you for the video!

I love your videos, keep going! <3

I’ve had my SP since I was 5! Every few years i’d pick it back up and replay some of the classics. After 21 years of it trucking through life perfectly fine I finally dropped it and the shell cracked, I guess the old plastic got brittle over time, it practically fell apart as I disassembled it. I switched over to a nice atomic purple shell, and this was super useful!! Thank you so much!!

Excellent video. I didn't have replacement switch but instead I opened it up from your instructions of disassembly and simply cleaned the internals and switches with isopropyl alcohol. Works perfect like new again. Thanks for sharing the video, appreciated.

Logitech is really over complicating mice. Too many parts. Too many screws.

Can you list the different tools needed to do this rebuild?

Hey your link shows 2 sizes of magnets they are out of stock but i can source others. Did you use the 3mm wide magnet or the 5mm wide magnet? Thanks in advance

Thanks for the guide, i had to replace my old shell because the plastic was so brittle and it was just falling apart. I'll tell you what, i never want to mess with these hinges again. lmao

I had one when I was a kid, the vent broke. I got one recently, used it very carefully, lent it to my girlfriend and the vent broke too 🙁

i would have to photograph every step so i can put it back together

Its spherical! ... SPHERICAL!!!!!!!!!!!!!

Great video dudes I repaired a friends mouse when he got a new one and gave me his old one just so I could repair it and have a backup. Your video helped a lot